<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Google.Apis.Gmail.v1</name>
    </assembly>
    <members>
        <member name="T:Google.Apis.Gmail.v1.GmailService">
            <summary>The Gmail Service.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Version">
            <summary>The API version.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.DiscoveryVersionUsed">
            <summary>The discovery version used to generate this service.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.GmailService.#ctor">
            <summary>Constructs a new service.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.GmailService.#ctor(Google.Apis.Services.BaseClientService.Initializer)">
            <summary>Constructs a new service.</summary>
            <param name="initializer">The service initializer.</param>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.Features">
            <summary>Gets the service supported features.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.Name">
            <summary>Gets the service name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.BaseUri">
            <summary>Gets the service base URI.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.BasePath">
            <summary>Gets the service base path.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.BatchUri">
            <summary>Gets the batch base URI; <c>null</c> if unspecified.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.BatchPath">
            <summary>Gets the batch base path; <c>null</c> if unspecified.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.GmailService.Scope">
            <summary>Available OAuth 2.0 scopes for use with the Gmail API.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.MailGoogleCom">
            <summary>Read, compose, send, and permanently delete all your email from Gmail</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailAddonsCurrentActionCompose">
            <summary>Manage drafts and send emails when you interact with the add-on</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailAddonsCurrentMessageAction">
            <summary>View your email messages when you interact with the add-on</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailAddonsCurrentMessageMetadata">
            <summary>View your email message metadata when the add-on is running</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailAddonsCurrentMessageReadonly">
            <summary>View your email messages when the add-on is running</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailCompose">
            <summary>Manage drafts and send emails</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailInsert">
            <summary>Add emails into your Gmail mailbox</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailLabels">
            <summary>See and edit your email labels</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailMetadata">
            <summary>View your email message metadata such as labels and headers, but not the email body</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailModify">
            <summary>Read, compose, and send emails from your Gmail account</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailReadonly">
            <summary>View your email messages and settings</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailSend">
            <summary>Send email on your behalf</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailSettingsBasic">
            <summary>See, edit, create, or change your email settings and filters in Gmail</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.Scope.GmailSettingsSharing">
            <summary>Manage your sensitive mail settings, including who can manage your mail</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.GmailService.ScopeConstants">
            <summary>Available OAuth 2.0 scope constants for use with the Gmail API.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.MailGoogleCom">
            <summary>Read, compose, send, and permanently delete all your email from Gmail</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailAddonsCurrentActionCompose">
            <summary>Manage drafts and send emails when you interact with the add-on</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailAddonsCurrentMessageAction">
            <summary>View your email messages when you interact with the add-on</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailAddonsCurrentMessageMetadata">
            <summary>View your email message metadata when the add-on is running</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailAddonsCurrentMessageReadonly">
            <summary>View your email messages when the add-on is running</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailCompose">
            <summary>Manage drafts and send emails</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailInsert">
            <summary>Add emails into your Gmail mailbox</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailLabels">
            <summary>See and edit your email labels</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailMetadata">
            <summary>View your email message metadata such as labels and headers, but not the email body</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailModify">
            <summary>Read, compose, and send emails from your Gmail account</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailReadonly">
            <summary>View your email messages and settings</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailSend">
            <summary>Send email on your behalf</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailSettingsBasic">
            <summary>See, edit, create, or change your email settings and filters in Gmail</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailService.ScopeConstants.GmailSettingsSharing">
            <summary>Manage your sensitive mail settings, including who can manage your mail</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailService.Users">
            <summary>Gets the Users resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1">
            <summary>A base abstract class for Gmail requests.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new GmailBaseServiceRequest instance.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports. Required
            unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string assigned to a
            user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.GmailBaseServiceRequest`1.InitParameters">
            <summary>Initializes Gmail parameter list.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource">
            <summary>The "users" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.Drafts">
            <summary>Gets the Drafts resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource">
            <summary>The "drafts" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Create(Google.Apis.Gmail.v1.Data.Draft,System.String)">
            <summary>Creates a new draft with the `DRAFT` label.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest">
            <summary>Creates a new draft with the `DRAFT` label.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Create(Google.Apis.Gmail.v1.Data.Draft,System.String,System.IO.Stream,System.String)">
            <summary>Creates a new draft with the `DRAFT` label.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload">
            <summary>Create media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.CreateMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Create media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Delete(System.String,System.String)">
            <summary>Immediately and permanently deletes the specified draft. Does not simply trash it.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the draft to delete.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest">
            <summary>Immediately and permanently deletes the specified draft. Does not simply trash it.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.Id">
            <summary>The ID of the draft to delete.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Get(System.String,System.String)">
            <summary>Gets the specified draft.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the draft to retrieve.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest">
            <summary>Gets the specified draft.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.Id">
            <summary>The ID of the draft to retrieve.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.Format">
            <summary>The format to return the draft in.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.FormatEnum">
            <summary>The format to return the draft in.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.FormatEnum.Minimal">
            <summary>
            Returns only email message ID and labels; does not return the email headers, body, or payload.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.FormatEnum.Full">
            <summary>
            Returns the full email message data with body content parsed in the `payload` field; the `raw`
            field is not used. Format cannot be used when accessing the api using the gmail.metadata scope.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.FormatEnum.Raw">
            <summary>
            Returns the full email message data with body content in the `raw` field as a base64url encoded
            string; the `payload` field is not used. Format cannot be used when accessing the api using the
            gmail.metadata scope.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.FormatEnum.Metadata">
            <summary>Returns only email message ID, labels, and email headers.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.List(System.String)">
            <summary>Lists the drafts in the user's mailbox.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest">
            <summary>Lists the drafts in the user's mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.IncludeSpamTrash">
            <summary>Include drafts from `SPAM` and `TRASH` in the results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.MaxResults">
            <summary>
            Maximum number of drafts to return. This field defaults to 100. The maximum allowed value for this
            field is 500.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.PageToken">
            <summary>Page token to retrieve a specific page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.Q">
            <summary>
            Only return draft messages matching the specified query. Supports the same query format as the Gmail
            search box. For example, `"from:someuser@example.com rfc822msgid: is:unread"`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Send(Google.Apis.Gmail.v1.Data.Draft,System.String)">
            <summary>
            Sends the specified, existing draft to the recipients in the `To`, `Cc`, and `Bcc` headers.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest">
            <summary>
            Sends the specified, existing draft to the recipients in the `To`, `Cc`, and `Bcc` headers.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String)">
            <summary>Constructs a new Send request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendRequest.InitParameters">
            <summary>Initializes Send parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Send(Google.Apis.Gmail.v1.Data.Draft,System.String,System.IO.Stream,System.String)">
            <summary>
            Sends the specified, existing draft to the recipients in the `To`, `Cc`, and `Bcc` headers.
            </summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload">
            <summary>Send media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.SendMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Send media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Update(Google.Apis.Gmail.v1.Data.Draft,System.String,System.String)">
            <summary>Replaces a draft's content.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the draft to update.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest">
            <summary>Replaces a draft's content.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String,System.String)">
            <summary>Constructs a new Update request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.Id">
            <summary>The ID of the draft to update.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateRequest.InitParameters">
            <summary>Initializes Update parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.Update(Google.Apis.Gmail.v1.Data.Draft,System.String,System.String,System.IO.Stream,System.String)">
            <summary>Replaces a draft's content.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the draft to update.</param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload">
            <summary>Update media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.Id">
            <summary>The ID of the draft to update.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.DraftsResource.UpdateMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Draft,System.String,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Update media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.History">
            <summary>Gets the History resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.HistoryResource">
            <summary>The "history" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.HistoryResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.HistoryResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.HistoryResource.List(System.String)">
            <summary>
            Lists the history of all changes to the given mailbox. History results are returned in chronological
            order (increasing `historyId`).
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest">
            <summary>
            Lists the history of all changes to the given mailbox. History results are returned in chronological
            order (increasing `historyId`).
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypes">
            <summary>History types to be returned by the function</summary>
            <remarks>
            Use this property to set a single value for the parameter, or <see cref="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesList"/> to set
            multiple values. Do not set both properties.
            </remarks>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesList">
            <summary>History types to be returned by the function</summary>
            <remarks>
            Use this property to set one or more values for the parameter. Do not set both this property and
            <see cref="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypes"/>.
            </remarks>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesEnum">
            <summary>History types to be returned by the function</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesEnum.MessageAdded">
            <summary></summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesEnum.MessageDeleted">
            <summary></summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesEnum.LabelAdded">
            <summary></summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HistoryTypesEnum.LabelRemoved">
            <summary></summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.LabelId">
            <summary>Only return messages with a label matching the ID.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.MaxResults">
            <summary>
            Maximum number of history records to return. This field defaults to 100. The maximum allowed value
            for this field is 500.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.PageToken">
            <summary>Page token to retrieve a specific page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.StartHistoryId">
            <summary>
            Required. Returns history records after the specified `startHistoryId`. The supplied
            `startHistoryId` should be obtained from the `historyId` of a message, thread, or previous `list`
            response. History IDs increase chronologically but are not contiguous with random gaps in between
            valid IDs. Supplying an invalid or out of date `startHistoryId` typically returns an `HTTP 404`
            error code. A `historyId` is typically valid for at least a week, but in some rare circumstances may
            be valid for only a few hours. If you receive an `HTTP 404` error response, your application should
            perform a full sync. If you receive no `nextPageToken` in the response, there are no updates to
            retrieve and you can store the returned `historyId` for a future request.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.HistoryResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.Labels">
            <summary>Gets the Labels resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource">
            <summary>The "labels" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.LabelsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.Create(Google.Apis.Gmail.v1.Data.Label,System.String)">
            <summary>Creates a new label.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest">
            <summary>Creates a new label.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Label,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.Delete(System.String,System.String)">
            <summary>
            Immediately and permanently deletes the specified label and removes it from any messages and threads
            that it is applied to.
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the label to delete.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest">
            <summary>
            Immediately and permanently deletes the specified label and removes it from any messages and threads
            that it is applied to.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.Id">
            <summary>The ID of the label to delete.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.Get(System.String,System.String)">
            <summary>Gets the specified label.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the label to retrieve.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest">
            <summary>Gets the specified label.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.Id">
            <summary>The ID of the label to retrieve.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.List(System.String)">
            <summary>Lists all labels in the user's mailbox.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest">
            <summary>Lists all labels in the user's mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.Patch(Google.Apis.Gmail.v1.Data.Label,System.String,System.String)">
            <summary>Patch the specified label.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the label to update.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest">
            <summary>Patch the specified label.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Label,System.String,System.String)">
            <summary>Constructs a new Patch request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.Id">
            <summary>The ID of the label to update.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.PatchRequest.InitParameters">
            <summary>Initializes Patch parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.Update(Google.Apis.Gmail.v1.Data.Label,System.String,System.String)">
            <summary>Updates the specified label.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the label to update.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest">
            <summary>Updates the specified label.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Label,System.String,System.String)">
            <summary>Constructs a new Update request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.Id">
            <summary>The ID of the label to update.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.LabelsResource.UpdateRequest.InitParameters">
            <summary>Initializes Update parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.Messages">
            <summary>Gets the Messages resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource">
            <summary>The "messages" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Attachments">
            <summary>Gets the Attachments resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource">
            <summary>The "attachments" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.Get(System.String,System.String,System.String)">
            <summary>Gets the specified message attachment.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="messageId">The ID of the message containing the attachment.</param>
            <param name="id">The ID of the attachment.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest">
            <summary>Gets the specified message attachment.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.MessageId">
            <summary>The ID of the message containing the attachment.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.Id">
            <summary>The ID of the attachment.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.AttachmentsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDelete(Google.Apis.Gmail.v1.Data.BatchDeleteMessagesRequest,System.String)">
            <summary>
            Deletes many messages by message ID. Provides no guarantees that messages were not already deleted or
            even existed at all.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest">
            <summary>
            Deletes many messages by message ID. Provides no guarantees that messages were not already deleted or
            even existed at all.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.BatchDeleteMessagesRequest,System.String)">
            <summary>Constructs a new BatchDelete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchDeleteRequest.InitParameters">
            <summary>Initializes BatchDelete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModify(Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest,System.String)">
            <summary>Modifies the labels on the specified messages.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest">
            <summary>Modifies the labels on the specified messages.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest,System.String)">
            <summary>Constructs a new BatchModify request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.BatchModifyRequest.InitParameters">
            <summary>Initializes BatchModify parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Delete(System.String,System.String)">
            <summary>
            Immediately and permanently deletes the specified message. This operation cannot be undone. Prefer
            `messages.trash` instead.
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the message to delete.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest">
            <summary>
            Immediately and permanently deletes the specified message. This operation cannot be undone. Prefer
            `messages.trash` instead.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.Id">
            <summary>The ID of the message to delete.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Get(System.String,System.String)">
            <summary>Gets the specified message.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">
            The ID of the message to retrieve. This ID is usually retrieved using `messages.list`. The ID is also
            contained in the result when a message is inserted (`messages.insert`) or imported (`messages.import`).
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest">
            <summary>Gets the specified message.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.Id">
            <summary>
            The ID of the message to retrieve. This ID is usually retrieved using `messages.list`. The ID is
            also contained in the result when a message is inserted (`messages.insert`) or imported
            (`messages.import`).
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.Format">
            <summary>The format to return the message in.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.FormatEnum">
            <summary>The format to return the message in.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.FormatEnum.Minimal">
            <summary>
            Returns only email message ID and labels; does not return the email headers, body, or payload.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.FormatEnum.Full">
            <summary>
            Returns the full email message data with body content parsed in the `payload` field; the `raw`
            field is not used. Format cannot be used when accessing the api using the gmail.metadata scope.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.FormatEnum.Raw">
            <summary>
            Returns the full email message data with body content in the `raw` field as a base64url encoded
            string; the `payload` field is not used. Format cannot be used when accessing the api using the
            gmail.metadata scope.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.FormatEnum.Metadata">
            <summary>Returns only email message ID, labels, and email headers.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.MetadataHeaders">
            <summary>When given and format is `METADATA`, only include headers specified.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Import(Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>
            Imports a message into only this user's mailbox, with standard email delivery scanning and
            classification similar to receiving via SMTP. This method doesn't perform SPF checks, so it might not
            work for some spam messages, such as those attempting to perform domain spoofing. This method does not
            send a message. Note: This function doesn't trigger forwarding rules or filters set up by the user.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest">
            <summary>
            Imports a message into only this user's mailbox, with standard email delivery scanning and
            classification similar to receiving via SMTP. This method doesn't perform SPF checks, so it might not
            work for some spam messages, such as those attempting to perform domain spoofing. This method does not
            send a message. Note: This function doesn't trigger forwarding rules or filters set up by the user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>Constructs a new Import request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.Deleted">
            <summary>
            Mark the email as permanently deleted (not TRASH) and only visible in Google Vault to a Vault
            administrator. Only used for Google Workspace accounts.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.InternalDateSource">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.InternalDateSourceEnum">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.InternalDateSourceEnum.ReceivedTime">
            <summary>Internal message date set to current time when received by Gmail.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.InternalDateSourceEnum.DateHeader">
            <summary>Internal message time based on 'Date' header in email, when valid.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.NeverMarkSpam">
            <summary>
            Ignore the Gmail spam classifier decision and never mark this email as SPAM in the mailbox.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.ProcessForCalendar">
            <summary>
            Process calendar invites in the email and add any extracted meetings to the Google Calendar for this
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportRequest.InitParameters">
            <summary>Initializes Import parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Import(Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>
            Imports a message into only this user's mailbox, with standard email delivery scanning and
            classification similar to receiving via SMTP. This method doesn't perform SPF checks, so it might not
            work for some spam messages, such as those attempting to perform domain spoofing. This method does not
            send a message. Note: This function doesn't trigger forwarding rules or filters set up by the user.
            </summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload">
            <summary>Import media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.Deleted">
            <summary>
            Mark the email as permanently deleted (not TRASH) and only visible in Google Vault to a Vault
            administrator. Only used for Google Workspace accounts.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.InternalDateSource">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.InternalDateSourceEnum">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.InternalDateSourceEnum.ReceivedTime">
            <summary>Internal message date set to current time when received by Gmail.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.InternalDateSourceEnum.DateHeader">
            <summary>Internal message time based on 'Date' header in email, when valid.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.NeverMarkSpam">
            <summary>
            Ignore the Gmail spam classifier decision and never mark this email as SPAM in the mailbox.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.ProcessForCalendar">
            <summary>
            Process calendar invites in the email and add any extracted meetings to the Google Calendar for this
            user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ImportMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Import media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Insert(Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>
            Directly inserts a message into only this user's mailbox similar to `IMAP APPEND`, bypassing most
            scanning and classification. Does not send a message.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest">
            <summary>
            Directly inserts a message into only this user's mailbox similar to `IMAP APPEND`, bypassing most
            scanning and classification. Does not send a message.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>Constructs a new Insert request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.Deleted">
            <summary>
            Mark the email as permanently deleted (not TRASH) and only visible in Google Vault to a Vault
            administrator. Only used for Google Workspace accounts.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.InternalDateSource">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.InternalDateSourceEnum">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.InternalDateSourceEnum.ReceivedTime">
            <summary>Internal message date set to current time when received by Gmail.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.InternalDateSourceEnum.DateHeader">
            <summary>Internal message time based on 'Date' header in email, when valid.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertRequest.InitParameters">
            <summary>Initializes Insert parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Insert(Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>
            Directly inserts a message into only this user's mailbox similar to `IMAP APPEND`, bypassing most
            scanning and classification. Does not send a message.
            </summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload">
            <summary>Insert media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.Deleted">
            <summary>
            Mark the email as permanently deleted (not TRASH) and only visible in Google Vault to a Vault
            administrator. Only used for Google Workspace accounts.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.InternalDateSource">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.InternalDateSourceEnum">
            <summary>Source for Gmail's internal date of the message.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.InternalDateSourceEnum.ReceivedTime">
            <summary>Internal message date set to current time when received by Gmail.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.InternalDateSourceEnum.DateHeader">
            <summary>Internal message time based on 'Date' header in email, when valid.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.InsertMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Insert media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.List(System.String)">
            <summary>Lists the messages in the user's mailbox.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest">
            <summary>Lists the messages in the user's mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.IncludeSpamTrash">
            <summary>Include messages from `SPAM` and `TRASH` in the results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.LabelIds">
            <summary>Only return messages with labels that match all of the specified label IDs.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.MaxResults">
            <summary>
            Maximum number of messages to return. This field defaults to 100. The maximum allowed value for this
            field is 500.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.PageToken">
            <summary>Page token to retrieve a specific page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.Q">
            <summary>
            Only return messages matching the specified query. Supports the same query format as the Gmail
            search box. For example, `"from:someuser@example.com rfc822msgid: is:unread"`. Parameter cannot be
            used when accessing the api using the gmail.metadata scope.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Modify(Google.Apis.Gmail.v1.Data.ModifyMessageRequest,System.String,System.String)">
            <summary>Modifies the labels on the specified message.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the message to modify.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest">
            <summary>Modifies the labels on the specified message.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.ModifyMessageRequest,System.String,System.String)">
            <summary>Constructs a new Modify request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.Id">
            <summary>The ID of the message to modify.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.ModifyRequest.InitParameters">
            <summary>Initializes Modify parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Send(Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>
            Sends the specified message to the recipients in the `To`, `Cc`, and `Bcc` headers. For example usage,
            see [Sending email](https://developers.google.com/gmail/api/guides/sending).
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest">
            <summary>
            Sends the specified message to the recipients in the `To`, `Cc`, and `Bcc` headers. For example usage,
            see [Sending email](https://developers.google.com/gmail/api/guides/sending).
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String)">
            <summary>Constructs a new Send request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendRequest.InitParameters">
            <summary>Initializes Send parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Send(Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>
            Sends the specified message to the recipients in the `To`, `Cc`, and `Bcc` headers. For example usage,
            see [Sending email](https://developers.google.com/gmail/api/guides/sending).
            </summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its current
            position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is completed
            </description>
            </item>
            <item><description>Caller is responsible for closing the <paramref name="stream"/></description></item>
            </list>
            </remarks>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="stream">The stream to upload. See remarks for further information.</param>
            <param name="contentType">The content type of the stream to upload.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload">
            <summary>Send media upload which supports resumable upload.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.Xgafv">
            <summary>V1 error format.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.XgafvEnum">
            <summary>V1 error format.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.XgafvEnum.Value1">
            <summary>v1 error format</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.XgafvEnum.Value2">
            <summary>v2 error format</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.AccessToken">
            <summary>OAuth access token.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.Alt">
            <summary>Data format for response.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.AltEnum">
            <summary>Data format for response.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.AltEnum.Json">
            <summary>Responses with Content-Type of application/json</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.AltEnum.Media">
            <summary>Media download with context-dependent Content-Type</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.AltEnum.Proto">
            <summary>Responses with Content-Type of application/x-protobuf</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.Callback">
            <summary>JSONP</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.Fields">
            <summary>Selector specifying which fields to include in a partial response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.Key">
            <summary>
            API key. Your API key identifies your project and provides you with API access, quota, and reports.
            Required unless you provide an OAuth 2.0 token.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.OauthToken">
            <summary>OAuth 2.0 token for the current user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.PrettyPrint">
            <summary>Returns response with indentations and line breaks.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.QuotaUser">
            <summary>
            Available to use for quota purposes for server-side applications. Can be any arbitrary string
            assigned to a user, but should not exceed 40 characters.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.UploadType">
            <summary>Legacy upload protocol for media (e.g. "media", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.UploadProtocol">
            <summary>Upload protocol for media (e.g. "raw", "multipart").</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.SendMediaUpload.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Message,System.String,System.IO.Stream,System.String)">
            <summary>Constructs a new Send media upload instance.</summary>
            <remarks>
            Considerations regarding <paramref name="stream"/>:
            <list type="bullet">
            <item>
            <description>
            If <paramref name="stream"/> is seekable, then the stream position will be reset to <c>0</c> before
            reading commences. If <paramref name="stream"/> is not seekable, then it will be read from its
            current position
            </description>
            </item>
            <item>
            <description>
            Caller is responsible for maintaining the <paramref name="stream"/> open until the upload is
            completed
            </description>
            </item>
            <item>
            <description>Caller is responsible for closing the <paramref name="stream"/></description>
            </item>
            </list>
            </remarks>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Trash(System.String,System.String)">
            <summary>Moves the specified message to the trash.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the message to Trash.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest">
            <summary>Moves the specified message to the trash.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Trash request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.Id">
            <summary>The ID of the message to Trash.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.TrashRequest.InitParameters">
            <summary>Initializes Trash parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.Untrash(System.String,System.String)">
            <summary>Removes the specified message from the trash.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the message to remove from Trash.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest">
            <summary>Removes the specified message from the trash.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Untrash request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.Id">
            <summary>The ID of the message to remove from Trash.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.MessagesResource.UntrashRequest.InitParameters">
            <summary>Initializes Untrash parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.Settings">
            <summary>Gets the Settings resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource">
            <summary>The "settings" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.Cse">
            <summary>Gets the Cse resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource">
            <summary>The "cse" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.Identities">
            <summary>Gets the Identities resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource">
            <summary>The "identities" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.Create(Google.Apis.Gmail.v1.Data.CseIdentity,System.String)">
            <summary>
            Creates and configures a client-side encryption identity that's authorized to send mail from the
            user account. Google publishes the S/MIME certificate to a shared domain-wide directory so that
            people within a Google Workspace organization can encrypt and send mail to the identity.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest">
            <summary>
            Creates and configures a client-side encryption identity that's authorized to send mail from the
            user account. Google publishes the S/MIME certificate to a shared domain-wide directory so that
            people within a Google Workspace organization can encrypt and send mail to the identity.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.CseIdentity,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.Delete(System.String,System.String)">
            <summary>
            Deletes a client-side encryption identity. The authenticated user can no longer use the identity
            to send encrypted messages. You cannot restore the identity after you delete it. Instead, use
            the CreateCseIdentity method to create another identity with the same configuration.
            </summary>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="cseEmailAddress">
            The primary email address associated with the client-side encryption identity configuration
            that's removed.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest">
            <summary>
            Deletes a client-side encryption identity. The authenticated user can no longer use the identity
            to send encrypted messages. You cannot restore the identity after you delete it. Instead, use
            the CreateCseIdentity method to create another identity with the same configuration.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.CseEmailAddress">
            <summary>
            The primary email address associated with the client-side encryption identity configuration
            that's removed.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.Get(System.String,System.String)">
            <summary>Retrieves a client-side encryption identity configuration.</summary>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="cseEmailAddress">
            The primary email address associated with the client-side encryption identity configuration
            that's retrieved.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest">
            <summary>Retrieves a client-side encryption identity configuration.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.CseEmailAddress">
            <summary>
            The primary email address associated with the client-side encryption identity configuration
            that's retrieved.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.List(System.String)">
            <summary>Lists the client-side encrypted identities for an authenticated user.</summary>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest">
            <summary>Lists the client-side encrypted identities for an authenticated user.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.PageSize">
            <summary>
            The number of identities to return. If not provided, the page size will default to 20
            entries.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.PageToken">
            <summary>
            Pagination token indicating which page of identities to return. If the token is not
            supplied, then the API will return the first page of results.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.Patch(Google.Apis.Gmail.v1.Data.CseIdentity,System.String,System.String)">
            <summary>
            Associates a different key pair with an existing client-side encryption identity. The updated
            key pair must validate against Google's [S/MIME certificate
            profiles](https://support.google.com/a/answer/7300887).
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="emailAddress">
            The email address of the client-side encryption identity to update.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest">
            <summary>
            Associates a different key pair with an existing client-side encryption identity. The updated
            key pair must validate against Google's [S/MIME certificate
            profiles](https://support.google.com/a/answer/7300887).
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.CseIdentity,System.String,System.String)">
            <summary>Constructs a new Patch request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.EmailAddress">
            <summary>The email address of the client-side encryption identity to update.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.IdentitiesResource.PatchRequest.InitParameters">
            <summary>Initializes Patch parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.Keypairs">
            <summary>Gets the Keypairs resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource">
            <summary>The "keypairs" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.Create(Google.Apis.Gmail.v1.Data.CseKeyPair,System.String)">
            <summary>
            Creates and uploads a client-side encryption S/MIME public key certificate chain and private key
            metadata for the authenticated user.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest">
            <summary>
            Creates and uploads a client-side encryption S/MIME public key certificate chain and private key
            metadata for the authenticated user.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.CseKeyPair,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.Disable(Google.Apis.Gmail.v1.Data.DisableCseKeyPairRequest,System.String,System.String)">
            <summary>
            Turns off a client-side encryption key pair. The authenticated user can no longer use the key
            pair to decrypt incoming CSE message texts or sign outgoing CSE mail. To regain access, use the
            EnableCseKeyPair to turn on the key pair. After 30 days, you can permanently delete the key pair
            by using the ObliterateCseKeyPair method.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="keyPairId">The identifier of the key pair to turn off.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest">
            <summary>
            Turns off a client-side encryption key pair. The authenticated user can no longer use the key
            pair to decrypt incoming CSE message texts or sign outgoing CSE mail. To regain access, use the
            EnableCseKeyPair to turn on the key pair. After 30 days, you can permanently delete the key pair
            by using the ObliterateCseKeyPair method.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.DisableCseKeyPairRequest,System.String,System.String)">
            <summary>Constructs a new Disable request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.KeyPairId">
            <summary>The identifier of the key pair to turn off.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.DisableRequest.InitParameters">
            <summary>Initializes Disable parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.Enable(Google.Apis.Gmail.v1.Data.EnableCseKeyPairRequest,System.String,System.String)">
            <summary>
            Turns on a client-side encryption key pair that was turned off. The key pair becomes active
            again for any associated client-side encryption identities.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="keyPairId">The identifier of the key pair to turn on.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest">
            <summary>
            Turns on a client-side encryption key pair that was turned off. The key pair becomes active
            again for any associated client-side encryption identities.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.EnableCseKeyPairRequest,System.String,System.String)">
            <summary>Constructs a new Enable request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.KeyPairId">
            <summary>The identifier of the key pair to turn on.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.EnableRequest.InitParameters">
            <summary>Initializes Enable parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.Get(System.String,System.String)">
            <summary>Retrieves an existing client-side encryption key pair.</summary>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="keyPairId">The identifier of the key pair to retrieve.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest">
            <summary>Retrieves an existing client-side encryption key pair.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.KeyPairId">
            <summary>The identifier of the key pair to retrieve.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.List(System.String)">
            <summary>Lists client-side encryption key pairs for an authenticated user.</summary>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest">
            <summary>Lists client-side encryption key pairs for an authenticated user.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.PageSize">
            <summary>
            The number of key pairs to return. If not provided, the page size will default to 20
            entries.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.PageToken">
            <summary>
            Pagination token indicating which page of key pairs to return. If the token is not supplied,
            then the API will return the first page of results.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.Obliterate(Google.Apis.Gmail.v1.Data.ObliterateCseKeyPairRequest,System.String,System.String)">
            <summary>
            Deletes a client-side encryption key pair permanently and immediately. You can only permanently
            delete key pairs that have been turned off for more than 30 days. To turn off a key pair, use
            the DisableCseKeyPair method. Gmail can't restore or decrypt any messages that were encrypted by
            an obliterated key. Authenticated users and Google Workspace administrators lose access to
            reading the encrypted messages.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </param>
            <param name="keyPairId">The identifier of the key pair to obliterate.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest">
            <summary>
            Deletes a client-side encryption key pair permanently and immediately. You can only permanently
            delete key pairs that have been turned off for more than 30 days. To turn off a key pair, use
            the DisableCseKeyPair method. Gmail can't restore or decrypt any messages that were encrypted by
            an obliterated key. Authenticated users and Google Workspace administrators lose access to
            reading the encrypted messages.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.ObliterateCseKeyPairRequest,System.String,System.String)">
            <summary>Constructs a new Obliterate request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.UserId">
            <summary>
            The requester's primary email address. To indicate the authenticated user, you can use the
            special value `me`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.KeyPairId">
            <summary>The identifier of the key pair to obliterate.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.CseResource.KeypairsResource.ObliterateRequest.InitParameters">
            <summary>Initializes Obliterate parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.Delegates">
            <summary>Gets the Delegates resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource">
            <summary>The "delegates" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.Create(Google.Apis.Gmail.v1.Data.Delegate,System.String)">
            <summary>
            Adds a delegate with its verification status set directly to `accepted`, without sending any
            verification email. The delegate user must be a member of the same Google Workspace organization as
            the delegator user. Gmail imposes limitations on the number of delegates and delegators each user in
            a Google Workspace organization can have. These limits depend on your organization, but in general
            each user can have up to 25 delegates and up to 10 delegators. Note that a delegate user must be
            referred to by their primary email address, and not an email alias. Also note that when a new
            delegate is created, there may be up to a one minute delay before the new delegate is available for
            use. This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest">
            <summary>
            Adds a delegate with its verification status set directly to `accepted`, without sending any
            verification email. The delegate user must be a member of the same Google Workspace organization as
            the delegator user. Gmail imposes limitations on the number of delegates and delegators each user in
            a Google Workspace organization can have. These limits depend on your organization, but in general
            each user can have up to 25 delegates and up to 10 delegators. Note that a delegate user must be
            referred to by their primary email address, and not an email alias. Also note that when a new
            delegate is created, there may be up to a one minute delay before the new delegate is available for
            use. This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Delegate,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.Delete(System.String,System.String)">
            <summary>
            Removes the specified delegate (which can be of any verification status), and revokes any
            verification that may have been required for using it. Note that a delegate user must be referred to
            by their primary email address, and not an email alias. This method is only available to service
            account clients that have been delegated domain-wide authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="delegateEmail">The email address of the user to be removed as a delegate.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest">
            <summary>
            Removes the specified delegate (which can be of any verification status), and revokes any
            verification that may have been required for using it. Note that a delegate user must be referred to
            by their primary email address, and not an email alias. This method is only available to service
            account clients that have been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.DelegateEmail">
            <summary>The email address of the user to be removed as a delegate.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.Get(System.String,System.String)">
            <summary>
            Gets the specified delegate. Note that a delegate user must be referred to by their primary email
            address, and not an email alias. This method is only available to service account clients that have
            been delegated domain-wide authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="delegateEmail">
            The email address of the user whose delegate relationship is to be retrieved.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest">
            <summary>
            Gets the specified delegate. Note that a delegate user must be referred to by their primary email
            address, and not an email alias. This method is only available to service account clients that have
            been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.DelegateEmail">
            <summary>The email address of the user whose delegate relationship is to be retrieved.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.List(System.String)">
            <summary>
            Lists the delegates for the specified account. This method is only available to service account
            clients that have been delegated domain-wide authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest">
            <summary>
            Lists the delegates for the specified account. This method is only available to service account
            clients that have been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.DelegatesResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.Filters">
            <summary>Gets the Filters resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource">
            <summary>The "filters" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.Create(Google.Apis.Gmail.v1.Data.Filter,System.String)">
            <summary>Creates a filter. Note: you can only create a maximum of 1,000 filters.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest">
            <summary>Creates a filter. Note: you can only create a maximum of 1,000 filters.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.Filter,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.Delete(System.String,System.String)">
            <summary>Immediately and permanently deletes the specified filter.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the filter to be deleted.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest">
            <summary>Immediately and permanently deletes the specified filter.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.Id">
            <summary>The ID of the filter to be deleted.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.Get(System.String,System.String)">
            <summary>Gets a filter.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the filter to be fetched.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest">
            <summary>Gets a filter.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.Id">
            <summary>The ID of the filter to be fetched.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.List(System.String)">
            <summary>Lists the message filters of a Gmail user.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest">
            <summary>Lists the message filters of a Gmail user.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.FiltersResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddresses">
            <summary>Gets the ForwardingAddresses resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource">
            <summary>The "forwardingAddresses" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.Create(Google.Apis.Gmail.v1.Data.ForwardingAddress,System.String)">
            <summary>
            Creates a forwarding address. If ownership verification is required, a message will be sent to the
            recipient and the resource's verification status will be set to `pending`; otherwise, the resource
            will be created with verification status set to `accepted`. This method is only available to service
            account clients that have been delegated domain-wide authority.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest">
            <summary>
            Creates a forwarding address. If ownership verification is required, a message will be sent to the
            recipient and the resource's verification status will be set to `pending`; otherwise, the resource
            will be created with verification status set to `accepted`. This method is only available to service
            account clients that have been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.ForwardingAddress,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.Delete(System.String,System.String)">
            <summary>
            Deletes the specified forwarding address and revokes any verification that may have been required.
            This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="forwardingEmail">The forwarding address to be deleted.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest">
            <summary>
            Deletes the specified forwarding address and revokes any verification that may have been required.
            This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.ForwardingEmail">
            <summary>The forwarding address to be deleted.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.Get(System.String,System.String)">
            <summary>Gets the specified forwarding address.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="forwardingEmail">The forwarding address to be retrieved.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest">
            <summary>Gets the specified forwarding address.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.ForwardingEmail">
            <summary>The forwarding address to be retrieved.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.List(System.String)">
            <summary>Lists the forwarding addresses for the specified account.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest">
            <summary>Lists the forwarding addresses for the specified account.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.ForwardingAddressesResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAs">
            <summary>Gets the SendAs resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource">
            <summary>The "sendAs" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfo">
            <summary>Gets the SmimeInfo resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource">
            <summary>The "smimeInfo" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.Delete(System.String,System.String,System.String)">
            <summary>Deletes the specified S/MIME config for the specified send-as alias.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">
            The email address that appears in the "From:" header for mail sent using this alias.
            </param>
            <param name="id">The immutable ID for the SmimeInfo.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest">
            <summary>Deletes the specified S/MIME config for the specified send-as alias.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.Id">
            <summary>The immutable ID for the SmimeInfo.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.Get(System.String,System.String,System.String)">
            <summary>Gets the specified S/MIME config for the specified send-as alias.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">
            The email address that appears in the "From:" header for mail sent using this alias.
            </param>
            <param name="id">The immutable ID for the SmimeInfo.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest">
            <summary>Gets the specified S/MIME config for the specified send-as alias.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.Id">
            <summary>The immutable ID for the SmimeInfo.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.Insert(Google.Apis.Gmail.v1.Data.SmimeInfo,System.String,System.String)">
            <summary>
            Insert (upload) the given S/MIME config for the specified send-as alias. Note that pkcs12 format
            is required for the key.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">
            The email address that appears in the "From:" header for mail sent using this alias.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest">
            <summary>
            Insert (upload) the given S/MIME config for the specified send-as alias. Note that pkcs12 format
            is required for the key.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.SmimeInfo,System.String,System.String)">
            <summary>Constructs a new Insert request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.InsertRequest.InitParameters">
            <summary>Initializes Insert parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.List(System.String,System.String)">
            <summary>Lists S/MIME configs for the specified send-as alias.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">
            The email address that appears in the "From:" header for mail sent using this alias.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest">
            <summary>Lists S/MIME configs for the specified send-as alias.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefault(System.String,System.String,System.String)">
            <summary>Sets the default S/MIME config for the specified send-as alias.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">
            The email address that appears in the "From:" header for mail sent using this alias.
            </param>
            <param name="id">The immutable ID for the SmimeInfo.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest">
            <summary>Sets the default S/MIME config for the specified send-as alias.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String,System.String)">
            <summary>Constructs a new SetDefault request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated
            user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.Id">
            <summary>The immutable ID for the SmimeInfo.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.SmimeInfoResource.SetDefaultRequest.InitParameters">
            <summary>Initializes SetDefault parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Create(Google.Apis.Gmail.v1.Data.SendAs,System.String)">
            <summary>
            Creates a custom "from" send-as alias. If an SMTP MSA is specified, Gmail will attempt to connect to
            the SMTP service to validate the configuration before creating the alias. If ownership verification
            is required for the alias, a message will be sent to the email address and the resource's
            verification status will be set to `pending`; otherwise, the resource will be created with
            verification status set to `accepted`. If a signature is provided, Gmail will sanitize the HTML
            before saving it with the alias. This method is only available to service account clients that have
            been delegated domain-wide authority.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest">
            <summary>
            Creates a custom "from" send-as alias. If an SMTP MSA is specified, Gmail will attempt to connect to
            the SMTP service to validate the configuration before creating the alias. If ownership verification
            is required for the alias, a message will be sent to the email address and the resource's
            verification status will be set to `pending`; otherwise, the resource will be created with
            verification status set to `accepted`. If a signature is provided, Gmail will sanitize the HTML
            before saving it with the alias. This method is only available to service account clients that have
            been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.SendAs,System.String)">
            <summary>Constructs a new Create request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.CreateRequest.InitParameters">
            <summary>Initializes Create parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Delete(System.String,System.String)">
            <summary>
            Deletes the specified send-as alias. Revokes any verification that may have been required for using
            it. This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">The send-as alias to be deleted.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest">
            <summary>
            Deletes the specified send-as alias. Revokes any verification that may have been required for using
            it. This method is only available to service account clients that have been delegated domain-wide
            authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.SendAsEmail">
            <summary>The send-as alias to be deleted.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Get(System.String,System.String)">
            <summary>
            Gets the specified send-as alias. Fails with an HTTP 404 error if the specified address is not a
            member of the collection.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">The send-as alias to be retrieved.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest">
            <summary>
            Gets the specified send-as alias. Fails with an HTTP 404 error if the specified address is not a
            member of the collection.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.SendAsEmail">
            <summary>The send-as alias to be retrieved.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.List(System.String)">
            <summary>
            Lists the send-as aliases for the specified account. The result includes the primary send-as address
            associated with the account as well as any custom "from" aliases.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest">
            <summary>
            Lists the send-as aliases for the specified account. The result includes the primary send-as address
            associated with the account as well as any custom "from" aliases.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Patch(Google.Apis.Gmail.v1.Data.SendAs,System.String,System.String)">
            <summary>Patch the specified send-as alias.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">The send-as alias to be updated.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest">
            <summary>Patch the specified send-as alias.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.SendAs,System.String,System.String)">
            <summary>Constructs a new Patch request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.SendAsEmail">
            <summary>The send-as alias to be updated.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.PatchRequest.InitParameters">
            <summary>Initializes Patch parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Update(Google.Apis.Gmail.v1.Data.SendAs,System.String,System.String)">
            <summary>
            Updates a send-as alias. If a signature is provided, Gmail will sanitize the HTML before saving it
            with the alias. Addresses other than the primary address for the account can only be updated by
            service account clients that have been delegated domain-wide authority.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">The send-as alias to be updated.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest">
            <summary>
            Updates a send-as alias. If a signature is provided, Gmail will sanitize the HTML before saving it
            with the alias. Addresses other than the primary address for the account can only be updated by
            service account clients that have been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.SendAs,System.String,System.String)">
            <summary>Constructs a new Update request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.SendAsEmail">
            <summary>The send-as alias to be updated.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.UpdateRequest.InitParameters">
            <summary>Initializes Update parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.Verify(System.String,System.String)">
            <summary>
            Sends a verification email to the specified send-as alias address. The verification status must be
            `pending`. This method is only available to service account clients that have been delegated
            domain-wide authority.
            </summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
            <param name="sendAsEmail">The send-as alias to be verified.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest">
            <summary>
            Sends a verification email to the specified send-as alias address. The verification status must be
            `pending`. This method is only available to service account clients that have been delegated
            domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Verify request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.SendAsEmail">
            <summary>The send-as alias to be verified.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.SendAsResource.VerifyRequest.InitParameters">
            <summary>Initializes Verify parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwarding(System.String)">
            <summary>Gets the auto-forwarding setting for the specified account.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest">
            <summary>Gets the auto-forwarding setting for the specified account.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetAutoForwarding request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetAutoForwardingRequest.InitParameters">
            <summary>Initializes GetAutoForwarding parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImap(System.String)">
            <summary>Gets IMAP settings.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest">
            <summary>Gets IMAP settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetImap request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetImapRequest.InitParameters">
            <summary>Initializes GetImap parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguage(System.String)">
            <summary>Gets language settings.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest">
            <summary>Gets language settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetLanguage request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetLanguageRequest.InitParameters">
            <summary>Initializes GetLanguage parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPop(System.String)">
            <summary>Gets POP settings.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest">
            <summary>Gets POP settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetPop request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetPopRequest.InitParameters">
            <summary>Initializes GetPop parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacation(System.String)">
            <summary>Gets vacation responder settings.</summary>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest">
            <summary>Gets vacation responder settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetVacation request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.GetVacationRequest.InitParameters">
            <summary>Initializes GetVacation parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwarding(Google.Apis.Gmail.v1.Data.AutoForwarding,System.String)">
            <summary>
            Updates the auto-forwarding setting for the specified account. A verified forwarding address must be
            specified when auto-forwarding is enabled. This method is only available to service account clients that
            have been delegated domain-wide authority.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest">
            <summary>
            Updates the auto-forwarding setting for the specified account. A verified forwarding address must be
            specified when auto-forwarding is enabled. This method is only available to service account clients that
            have been delegated domain-wide authority.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.AutoForwarding,System.String)">
            <summary>Constructs a new UpdateAutoForwarding request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateAutoForwardingRequest.InitParameters">
            <summary>Initializes UpdateAutoForwarding parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImap(Google.Apis.Gmail.v1.Data.ImapSettings,System.String)">
            <summary>Updates IMAP settings.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest">
            <summary>Updates IMAP settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.ImapSettings,System.String)">
            <summary>Constructs a new UpdateImap request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateImapRequest.InitParameters">
            <summary>Initializes UpdateImap parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguage(Google.Apis.Gmail.v1.Data.LanguageSettings,System.String)">
            <summary>
            Updates language settings. If successful, the return object contains the `displayLanguage` that was
            saved for the user, which may differ from the value passed into the request. This is because the
            requested `displayLanguage` may not be directly supported by Gmail but have a close variant that is, and
            so the variant may be chosen and saved instead.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest">
            <summary>
            Updates language settings. If successful, the return object contains the `displayLanguage` that was
            saved for the user, which may differ from the value passed into the request. This is because the
            requested `displayLanguage` may not be directly supported by Gmail but have a close variant that is, and
            so the variant may be chosen and saved instead.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.LanguageSettings,System.String)">
            <summary>Constructs a new UpdateLanguage request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateLanguageRequest.InitParameters">
            <summary>Initializes UpdateLanguage parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePop(Google.Apis.Gmail.v1.Data.PopSettings,System.String)">
            <summary>Updates POP settings.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest">
            <summary>Updates POP settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.PopSettings,System.String)">
            <summary>Constructs a new UpdatePop request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdatePopRequest.InitParameters">
            <summary>Initializes UpdatePop parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacation(Google.Apis.Gmail.v1.Data.VacationSettings,System.String)">
            <summary>Updates vacation responder settings.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest">
            <summary>Updates vacation responder settings.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.VacationSettings,System.String)">
            <summary>Constructs a new UpdateVacation request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.UserId">
            <summary>
            User's email address. The special value "me" can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.SettingsResource.UpdateVacationRequest.InitParameters">
            <summary>Initializes UpdateVacation parameter list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.Threads">
            <summary>Gets the Threads resource.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource">
            <summary>The "threads" collection of methods.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.service">
            <summary>The service which this resource belongs to.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.#ctor(Google.Apis.Services.IClientService)">
            <summary>Constructs a new resource.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.Delete(System.String,System.String)">
            <summary>
            Immediately and permanently deletes the specified thread. Any messages that belong to the thread are
            also deleted. This operation cannot be undone. Prefer `threads.trash` instead.
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">ID of the Thread to delete.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest">
            <summary>
            Immediately and permanently deletes the specified thread. Any messages that belong to the thread are
            also deleted. This operation cannot be undone. Prefer `threads.trash` instead.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Delete request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.Id">
            <summary>ID of the Thread to delete.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.DeleteRequest.InitParameters">
            <summary>Initializes Delete parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.Get(System.String,System.String)">
            <summary>Gets the specified thread.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the thread to retrieve.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest">
            <summary>Gets the specified thread.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Get request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.Id">
            <summary>The ID of the thread to retrieve.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.Format">
            <summary>The format to return the messages in.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.FormatEnum">
            <summary>The format to return the messages in.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.FormatEnum.Full">
            <summary>
            Returns the full email message data with body content parsed in the `payload` field; the `raw`
            field is not used. Format cannot be used when accessing the api using the gmail.metadata scope.
            </summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.FormatEnum.Metadata">
            <summary>Returns only email message IDs, labels, and email headers.</summary>
        </member>
        <member name="F:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.FormatEnum.Minimal">
            <summary>
            Returns only email message IDs and labels; does not return the email headers, body, or payload.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.MetadataHeaders">
            <summary>When given and format is METADATA, only include headers specified.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.GetRequest.InitParameters">
            <summary>Initializes Get parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.List(System.String)">
            <summary>Lists the threads in the user's mailbox.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest">
            <summary>Lists the threads in the user's mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new List request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.IncludeSpamTrash">
            <summary>Include threads from `SPAM` and `TRASH` in the results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.LabelIds">
            <summary>Only return threads with labels that match all of the specified label IDs.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.MaxResults">
            <summary>
            Maximum number of threads to return. This field defaults to 100. The maximum allowed value for this
            field is 500.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.PageToken">
            <summary>Page token to retrieve a specific page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.Q">
            <summary>
            Only return threads matching the specified query. Supports the same query format as the Gmail search
            box. For example, `"from:someuser@example.com rfc822msgid: is:unread"`. Parameter cannot be used
            when accessing the api using the gmail.metadata scope.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ListRequest.InitParameters">
            <summary>Initializes List parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.Modify(Google.Apis.Gmail.v1.Data.ModifyThreadRequest,System.String,System.String)">
            <summary>
            Modifies the labels applied to the thread. This applies to all messages in the thread.
            </summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the thread to modify.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest">
            <summary>
            Modifies the labels applied to the thread. This applies to all messages in the thread.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.ModifyThreadRequest,System.String,System.String)">
            <summary>Constructs a new Modify request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.Id">
            <summary>The ID of the thread to modify.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.ModifyRequest.InitParameters">
            <summary>Initializes Modify parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.Trash(System.String,System.String)">
            <summary>
            Moves the specified thread to the trash. Any messages that belong to the thread are also moved to the
            trash.
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the thread to Trash.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest">
            <summary>
            Moves the specified thread to the trash. Any messages that belong to the thread are also moved to the
            trash.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Trash request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.Id">
            <summary>The ID of the thread to Trash.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.TrashRequest.InitParameters">
            <summary>Initializes Trash parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.Untrash(System.String,System.String)">
            <summary>
            Removes the specified thread from the trash. Any messages that belong to the thread are also removed
            from the trash.
            </summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
            <param name="id">The ID of the thread to remove from Trash.</param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest">
            <summary>
            Removes the specified thread from the trash. Any messages that belong to the thread are also removed
            from the trash.
            </summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.#ctor(Google.Apis.Services.IClientService,System.String,System.String)">
            <summary>Constructs a new Untrash request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.Id">
            <summary>The ID of the thread to remove from Trash.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.ThreadsResource.UntrashRequest.InitParameters">
            <summary>Initializes Untrash parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.GetProfile(System.String)">
            <summary>Gets the current user's Gmail profile.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest">
            <summary>Gets the current user's Gmail profile.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new GetProfile request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.GetProfileRequest.InitParameters">
            <summary>Initializes GetProfile parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.Stop(System.String)">
            <summary>Stop receiving push notifications for the given user mailbox.</summary>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.StopRequest">
            <summary>Stop receiving push notifications for the given user mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.StopRequest.#ctor(Google.Apis.Services.IClientService,System.String)">
            <summary>Constructs a new Stop request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.StopRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.StopRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.StopRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.StopRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.StopRequest.InitParameters">
            <summary>Initializes Stop parameter list.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.Watch(Google.Apis.Gmail.v1.Data.WatchRequest,System.String)">
            <summary>Set up or update a push notification watch on the given user mailbox.</summary>
            <param name="body">The body of the request.</param>
            <param name="userId">
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </param>
        </member>
        <member name="T:Google.Apis.Gmail.v1.UsersResource.WatchRequest">
            <summary>Set up or update a push notification watch on the given user mailbox.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.WatchRequest.#ctor(Google.Apis.Services.IClientService,Google.Apis.Gmail.v1.Data.WatchRequest,System.String)">
            <summary>Constructs a new Watch request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.WatchRequest.UserId">
            <summary>
            The user's email address. The special value `me` can be used to indicate the authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.WatchRequest.Body">
            <summary>Gets or sets the body of this request.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.WatchRequest.GetBody">
            <summary>Returns the body of the request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.WatchRequest.MethodName">
            <summary>Gets the method name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.WatchRequest.HttpMethod">
            <summary>Gets the HTTP method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.UsersResource.WatchRequest.RestPath">
            <summary>Gets the REST path.</summary>
        </member>
        <member name="M:Google.Apis.Gmail.v1.UsersResource.WatchRequest.InitParameters">
            <summary>Initializes Watch parameter list.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.AutoForwarding">
            <summary>Auto-forwarding settings for an account.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.AutoForwarding.Disposition">
            <summary>The state that a message should be left in after it has been forwarded.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.AutoForwarding.EmailAddress">
            <summary>
            Email address to which all incoming messages are forwarded. This email address must be a verified member of
            the forwarding addresses.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.AutoForwarding.Enabled">
            <summary>Whether all incoming mail is automatically forwarded to another address.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.AutoForwarding.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchDeleteMessagesRequest.Ids">
            <summary>The IDs of the messages to delete.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchDeleteMessagesRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest.AddLabelIds">
            <summary>A list of label IDs to add to messages.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest.Ids">
            <summary>The IDs of the messages to modify. There is a limit of 1000 ids per request.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest.RemoveLabelIds">
            <summary>A list of label IDs to remove from messages.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.BatchModifyMessagesRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.CseIdentity">
            <summary>
            The client-side encryption (CSE) configuration for the email address of an authenticated user. Gmail uses CSE
            configurations to save drafts of client-side encrypted email messages, and to sign and send encrypted email
            messages.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseIdentity.EmailAddress">
            <summary>
            The email address for the sending identity. The email address must be the primary email address of the
            authenticated user.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseIdentity.PrimaryKeyPairId">
            <summary>If a key pair is associated, the identifier of the key pair, CseKeyPair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseIdentity.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.CseKeyPair">
            <summary>
            A client-side encryption S/MIME key pair, which is comprised of a public key, its certificate chain, and
            metadata for its paired private key. Gmail uses the key pair to complete the following tasks: - Sign outgoing
            client-side encrypted messages. - Save and reopen drafts of client-side encrypted messages. - Save and reopen
            sent messages. - Decrypt incoming or archived S/MIME messages.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.DisableTime">
            <summary>
            Output only. If a key pair is set to `DISABLED`, the time that the key pair's state changed from `ENABLED`
            to `DISABLED`. This field is present only when the key pair is in state `DISABLED`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.EnablementState">
            <summary>Output only. The current state of the key pair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.KeyPairId">
            <summary>Output only. The immutable ID for the client-side encryption S/MIME key pair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.Pem">
            <summary>
            Output only. The public key and its certificate chain, in
            [PEM](https://en.wikipedia.org/wiki/Privacy-Enhanced_Mail) format.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.Pkcs7">
            <summary>
            Input only. The public key and its certificate chain. The chain must be in
            [PKCS#7](https://en.wikipedia.org/wiki/PKCS_7) format and use PEM encoding and ASCII armor.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.PrivateKeyMetadata">
            <summary>Metadata for instances of this key pair's private key.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.SubjectEmailAddresses">
            <summary>Output only. The email address identities that are specified on the leaf certificate.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CseKeyPair.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.CsePrivateKeyMetadata">
            <summary>Metadata for a private key instance.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CsePrivateKeyMetadata.KaclsKeyMetadata">
            <summary>
            Metadata for a private key instance managed by an external key access control list service.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CsePrivateKeyMetadata.PrivateKeyMetadataId">
            <summary>Output only. The immutable ID for the private key metadata instance.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.CsePrivateKeyMetadata.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Delegate">
            <summary>
            Settings for a delegate. Delegates can read, send, and delete messages, as well as view and add contacts, for
            the delegator's account. See "Set up mail delegation" for more information about delegates.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Delegate.DelegateEmail">
            <summary>The email address of the delegate.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Delegate.VerificationStatus">
            <summary>
            Indicates whether this address has been verified and can act as a delegate for the account. Read-only.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Delegate.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.DisableCseKeyPairRequest">
            <summary>Requests to turn off a client-side encryption key pair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.DisableCseKeyPairRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Draft">
            <summary>A draft email in the user's mailbox.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Draft.Id">
            <summary>The immutable ID of the draft.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Draft.Message">
            <summary>The message content of the draft.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Draft.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.EnableCseKeyPairRequest">
            <summary>Requests to turn on a client-side encryption key pair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.EnableCseKeyPairRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Filter">
            <summary>
            Resource definition for Gmail filters. Filters apply to specific messages instead of an entire email thread.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Filter.Action">
            <summary>Action that the filter performs.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Filter.Criteria">
            <summary>Matching criteria for the filter.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Filter.Id">
            <summary>The server assigned ID of the filter.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Filter.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.FilterAction">
            <summary>A set of actions to perform on a message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterAction.AddLabelIds">
            <summary>List of labels to add to the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterAction.Forward">
            <summary>Email address that the message should be forwarded to.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterAction.RemoveLabelIds">
            <summary>List of labels to remove from the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterAction.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.FilterCriteria">
            <summary>Message matching criteria.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.ExcludeChats">
            <summary>Whether the response should exclude chats.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.From">
            <summary>The sender's display name or email address.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.HasAttachment">
            <summary>Whether the message has any attachment.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.NegatedQuery">
            <summary>
            Only return messages not matching the specified query. Supports the same query format as the Gmail search
            box. For example, `"from:someuser@example.com rfc822msgid: is:unread"`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.Query">
            <summary>
            Only return messages matching the specified query. Supports the same query format as the Gmail search box.
            For example, `"from:someuser@example.com rfc822msgid: is:unread"`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.Size">
            <summary>The size of the entire RFC822 message in bytes, including all headers and attachments.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.SizeComparison">
            <summary>How the message size in bytes should be in relation to the size field.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.Subject">
            <summary>
            Case-insensitive phrase found in the message's subject. Trailing and leading whitespace are be trimmed and
            adjacent spaces are collapsed.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.To">
            <summary>
            The recipient's display name or email address. Includes recipients in the "to", "cc", and "bcc" header
            fields. You can use simply the local part of the email address. For example, "example" and "example@" both
            match "example@gmail.com". This field is case-insensitive.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.FilterCriteria.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ForwardingAddress">
            <summary>Settings for a forwarding address.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ForwardingAddress.ForwardingEmail">
            <summary>An email address to which messages can be forwarded.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ForwardingAddress.VerificationStatus">
            <summary>Indicates whether this address has been verified and is usable for forwarding. Read-only.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ForwardingAddress.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.History">
            <summary>
            A record of a change to the user's mailbox. Each history change may affect multiple messages in multiple ways.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.Id">
            <summary>The mailbox sequence ID.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.LabelsAdded">
            <summary>Labels added to messages in this history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.LabelsRemoved">
            <summary>Labels removed from messages in this history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.Messages">
            <summary>
            List of messages changed in this history record. The fields for specific change types, such as
            `messagesAdded` may duplicate messages in this field. We recommend using the specific change-type fields
            instead of this.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.MessagesAdded">
            <summary>Messages added to the mailbox in this history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.MessagesDeleted">
            <summary>Messages deleted (not Trashed) from the mailbox in this history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.History.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryLabelAdded.LabelIds">
            <summary>Label IDs added to the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryLabelAdded.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryLabelRemoved.LabelIds">
            <summary>Label IDs removed from the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryLabelRemoved.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryMessageAdded.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.HistoryMessageDeleted.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ImapSettings">
            <summary>IMAP settings for an account.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ImapSettings.AutoExpunge">
            <summary>
            If this value is true, Gmail will immediately expunge a message when it is marked as deleted in IMAP.
            Otherwise, Gmail will wait for an update from the client before expunging messages marked as deleted.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ImapSettings.Enabled">
            <summary>Whether IMAP is enabled for the account.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ImapSettings.ExpungeBehavior">
            <summary>
            The action that will be executed on a message when it is marked as deleted and expunged from the last
            visible IMAP folder.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ImapSettings.MaxFolderSize">
            <summary>
            An optional limit on the number of messages that an IMAP folder may contain. Legal values are 0, 1000, 2000,
            5000 or 10000. A value of zero is interpreted to mean that there is no limit.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ImapSettings.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.KaclsKeyMetadata">
            <summary>
            Metadata for private keys managed by an external key access control list service. For details about managing key
            access, see [Google Workspace CSE API Reference](https://developers.google.com/workspace/cse/reference).
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.KaclsKeyMetadata.KaclsData">
            <summary>
            Opaque data generated and used by the key access control list service. Maximum size: 8 KiB.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.KaclsKeyMetadata.KaclsUri">
            <summary>The URI of the key access control list service that manages the private key.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.KaclsKeyMetadata.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Label">
            <summary>
            Labels are used to categorize messages and threads within the user's mailbox. The maximum number of labels
            supported for a user's mailbox is 10,000.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.Color">
            <summary>
            The color to assign to the label. Color is only available for labels that have their `type` set to `user`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.Id">
            <summary>The immutable ID of the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.LabelListVisibility">
            <summary>The visibility of the label in the label list in the Gmail web interface.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.MessageListVisibility">
            <summary>
            The visibility of messages with this label in the message list in the Gmail web interface.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.MessagesTotal">
            <summary>The total number of messages with the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.MessagesUnread">
            <summary>The number of unread messages with the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.Name">
            <summary>The display name of the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.ThreadsTotal">
            <summary>The total number of threads with the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.ThreadsUnread">
            <summary>The number of unread threads with the label.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.Type">
            <summary>
            The owner type for the label. User labels are created by the user and can be modified and deleted by the
            user and can be applied to any message or thread. System labels are internally created and cannot be added,
            modified, or deleted. System labels may be able to be applied to or removed from messages and threads under
            some circumstances but this is not guaranteed. For example, users can apply and remove the `INBOX` and
            `UNREAD` labels from messages and threads, but cannot apply or remove the `DRAFTS` or `SENT` labels from
            messages or threads.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Label.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.LabelColor.BackgroundColor">
            <summary>
            The background color represented as hex string #RRGGBB (ex #000000). This field is required in order to set
            the color of a label. Only the following predefined set of color values are allowed: \#000000, #434343,
            #666666, #999999, #cccccc, #efefef, #f3f3f3, #ffffff, \#fb4c2f, #ffad47, #fad165, #16a766, #43d692, #4a86e8,
            #a479e2, #f691b3, \#f6c5be, #ffe6c7, #fef1d1, #b9e4d0, #c6f3de, #c9daf8, #e4d7f5, #fcdee8, \#efa093,
            #ffd6a2, #fce8b3, #89d3b2, #a0eac9, #a4c2f4, #d0bcf1, #fbc8d9, \#e66550, #ffbc6b, #fcda83, #44b984, #68dfa9,
            #6d9eeb, #b694e8, #f7a7c0, \#cc3a21, #eaa041, #f2c960, #149e60, #3dc789, #3c78d8, #8e63ce, #e07798,
            \#ac2b16, #cf8933, #d5ae49, #0b804b, #2a9c68, #285bac, #653e9b, #b65775, \#822111, #a46a21, #aa8831,
            #076239, #1a764d, #1c4587, #41236d, #83334c \#464646, #e7e7e7, #0d3472, #b6cff5, #0d3b44, #98d7e4, #3d188e,
            #e3d7ff, \#711a36, #fbd3e0, #8a1c0a, #f2b2a8, #7a2e0b, #ffc8af, #7a4706, #ffdeb5, \#594c05, #fbe983,
            #684e07, #fdedc1, #0b4f30, #b3efd3, #04502e, #a2dcc1, \#c2c2c2, #4986e7, #2da2bb, #b99aff, #994a64, #f691b2,
            #ff7537, #ffad46, \#662e37, #ebdbde, #cca6ac, #094228, #42d692, #16a765
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.LabelColor.TextColor">
            <summary>
            The text color of the label, represented as hex string. This field is required in order to set the color of
            a label. Only the following predefined set of color values are allowed: \#000000, #434343, #666666, #999999,
            #cccccc, #efefef, #f3f3f3, #ffffff, \#fb4c2f, #ffad47, #fad165, #16a766, #43d692, #4a86e8, #a479e2, #f691b3,
            \#f6c5be, #ffe6c7, #fef1d1, #b9e4d0, #c6f3de, #c9daf8, #e4d7f5, #fcdee8, \#efa093, #ffd6a2, #fce8b3,
            #89d3b2, #a0eac9, #a4c2f4, #d0bcf1, #fbc8d9, \#e66550, #ffbc6b, #fcda83, #44b984, #68dfa9, #6d9eeb, #b694e8,
            #f7a7c0, \#cc3a21, #eaa041, #f2c960, #149e60, #3dc789, #3c78d8, #8e63ce, #e07798, \#ac2b16, #cf8933,
            #d5ae49, #0b804b, #2a9c68, #285bac, #653e9b, #b65775, \#822111, #a46a21, #aa8831, #076239, #1a764d, #1c4587,
            #41236d, #83334c \#464646, #e7e7e7, #0d3472, #b6cff5, #0d3b44, #98d7e4, #3d188e, #e3d7ff, \#711a36, #fbd3e0,
            #8a1c0a, #f2b2a8, #7a2e0b, #ffc8af, #7a4706, #ffdeb5, \#594c05, #fbe983, #684e07, #fdedc1, #0b4f30, #b3efd3,
            #04502e, #a2dcc1, \#c2c2c2, #4986e7, #2da2bb, #b99aff, #994a64, #f691b2, #ff7537, #ffad46, \#662e37,
            #ebdbde, #cca6ac, #094228, #42d692, #16a765
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.LabelColor.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.LanguageSettings">
            <summary>
            Language settings for an account. These settings correspond to the "Language settings" feature in the web
            interface.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.LanguageSettings.DisplayLanguage">
            <summary>
            The language to display Gmail in, formatted as an RFC 3066 Language Tag (for example `en-GB`, `fr` or `ja`
            for British English, French, or Japanese respectively). The set of languages supported by Gmail evolves over
            time, so please refer to the "Language" dropdown in the Gmail settings for all available options, as
            described in the language settings help article. A table of sample values is also provided in the Managing
            Language Settings guide Not all Gmail clients can display the same set of languages. In the case that a
            user's display language is not available for use on a particular client, said client automatically chooses
            to display in the closest supported variant (or a reasonable default).
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.LanguageSettings.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseIdentitiesResponse.CseIdentities">
            <summary>One page of the list of CSE identities configured for the user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseIdentitiesResponse.NextPageToken">
            <summary>
            Pagination token to be passed to a subsequent ListCseIdentities call in order to retrieve the next page of
            identities. If this value is not returned or is the empty string, then no further pages remain.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseIdentitiesResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseKeyPairsResponse.CseKeyPairs">
            <summary>One page of the list of CSE key pairs installed for the user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseKeyPairsResponse.NextPageToken">
            <summary>
            Pagination token to be passed to a subsequent ListCseKeyPairs call in order to retrieve the next page of key
            pairs. If this value is not returned, then no further pages remain.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListCseKeyPairsResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ListDelegatesResponse">
            <summary>Response for the ListDelegates method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDelegatesResponse.Delegates">
            <summary>
            List of the user's delegates (with any verification status). If an account doesn't have delegates, this
            field doesn't appear.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDelegatesResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDraftsResponse.Drafts">
            <summary>
            List of drafts. Note that the `Message` property in each `Draft` resource only contains an `id` and a
            `threadId`. The messages.get method can fetch additional message details.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDraftsResponse.NextPageToken">
            <summary>Token to retrieve the next page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDraftsResponse.ResultSizeEstimate">
            <summary>Estimated total number of results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListDraftsResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ListFiltersResponse">
            <summary>Response for the ListFilters method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListFiltersResponse.Filter">
            <summary>List of a user's filters.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListFiltersResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ListForwardingAddressesResponse">
            <summary>Response for the ListForwardingAddresses method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListForwardingAddressesResponse.ForwardingAddresses">
            <summary>List of addresses that may be used for forwarding.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListForwardingAddressesResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListHistoryResponse.History">
            <summary>
            List of history records. Any `messages` contained in the response will typically only have `id` and
            `threadId` fields populated.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListHistoryResponse.HistoryId">
            <summary>The ID of the mailbox's current history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListHistoryResponse.NextPageToken">
            <summary>Page token to retrieve the next page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListHistoryResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListLabelsResponse.Labels">
            <summary>
            List of labels. Note that each label resource only contains an `id`, `name`, `messageListVisibility`,
            `labelListVisibility`, and `type`. The labels.get method can fetch additional label details.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListLabelsResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListMessagesResponse.Messages">
            <summary>
            List of messages. Note that each message resource contains only an `id` and a `threadId`. Additional message
            details can be fetched using the messages.get method.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListMessagesResponse.NextPageToken">
            <summary>Token to retrieve the next page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListMessagesResponse.ResultSizeEstimate">
            <summary>Estimated total number of results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListMessagesResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ListSendAsResponse">
            <summary>Response for the ListSendAs method.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListSendAsResponse.SendAs">
            <summary>List of send-as aliases.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListSendAsResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListSmimeInfoResponse.SmimeInfo">
            <summary>List of SmimeInfo.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListSmimeInfoResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListThreadsResponse.NextPageToken">
            <summary>Page token to retrieve the next page of results in the list.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListThreadsResponse.ResultSizeEstimate">
            <summary>Estimated total number of results.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListThreadsResponse.Threads">
            <summary>
            List of threads. Note that each thread resource does not contain a list of `messages`. The list of
            `messages` for a given thread can be fetched using the threads.get method.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ListThreadsResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Message">
            <summary>An email message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.HistoryId">
            <summary>The ID of the last history record that modified this message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.Id">
            <summary>The immutable ID of the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.InternalDate">
            <summary>
            The internal message creation timestamp (epoch ms), which determines ordering in the inbox. For normal
            SMTP-received email, this represents the time the message was originally accepted by Google, which is more
            reliable than the `Date` header. However, for API-migrated mail, it can be configured by client to be based
            on the `Date` header.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.LabelIds">
            <summary>List of IDs of labels applied to this message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.Payload">
            <summary>The parsed email structure in the message parts.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.Raw">
            <summary>
            The entire email message in an RFC 2822 formatted and base64url encoded string. Returned in `messages.get`
            and `drafts.get` responses when the `format=RAW` parameter is supplied.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.SizeEstimate">
            <summary>Estimated size in bytes of the message.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.Snippet">
            <summary>A short part of the message text.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.ThreadId">
            <summary>
            The ID of the thread the message belongs to. To add a message or draft to a thread, the following criteria
            must be met: 1. The requested `threadId` must be specified on the `Message` or `Draft.Message` you supply
            with your request. 2. The `References` and `In-Reply-To` headers must be set in compliance with the [RFC
            2822](https://tools.ietf.org/html/rfc2822) standard. 3. The `Subject` headers must match.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Message.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.MessagePart">
            <summary>A single MIME message part.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.Body">
            <summary>The message part body for this part, which may be empty for container MIME message parts.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.Filename">
            <summary>
            The filename of the attachment. Only present if this message part represents an attachment.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.Headers">
            <summary>
            List of headers on this message part. For the top-level message part, representing the entire message
            payload, it will contain the standard RFC 2822 email headers such as `To`, `From`, and `Subject`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.MimeType">
            <summary>The MIME type of the message part.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.PartId">
            <summary>The immutable ID of the message part.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.Parts">
            <summary>
            The child MIME message parts of this part. This only applies to container MIME message parts, for example
            `multipart/*`. For non- container MIME message part types, such as `text/plain`, this field is empty. For
            more information, see RFC 1521.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePart.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.MessagePartBody">
            <summary>The body of a single MIME message part.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartBody.AttachmentId">
            <summary>
            When present, contains the ID of an external attachment that can be retrieved in a separate
            `messages.attachments.get` request. When not present, the entire content of the message part body is
            contained in the data field.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartBody.Data">
            <summary>
            The body data of a MIME message part as a base64url encoded string. May be empty for MIME container types
            that have no message body or when the body data is sent as a separate attachment. An attachment ID is
            present if the body data is contained in a separate attachment.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartBody.Size">
            <summary>Number of bytes for the message part data (encoding notwithstanding).</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartBody.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartHeader.Name">
            <summary>The name of the header before the `:` separator. For example, `To`.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartHeader.Value">
            <summary>The value of the header after the `:` separator. For example, `someuser@example.com`.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.MessagePartHeader.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyMessageRequest.AddLabelIds">
            <summary>
            A list of IDs of labels to add to this message. You can add up to 100 labels with each update.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyMessageRequest.RemoveLabelIds">
            <summary>
            A list IDs of labels to remove from this message. You can remove up to 100 labels with each update.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyMessageRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyThreadRequest.AddLabelIds">
            <summary>
            A list of IDs of labels to add to this thread. You can add up to 100 labels with each update.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyThreadRequest.RemoveLabelIds">
            <summary>
            A list of IDs of labels to remove from this thread. You can remove up to 100 labels with each update.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ModifyThreadRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.ObliterateCseKeyPairRequest">
            <summary>Request to obliterate a CSE key pair.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.ObliterateCseKeyPairRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.PopSettings">
            <summary>POP settings for an account.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.PopSettings.AccessWindow">
            <summary>The range of messages which are accessible via POP.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.PopSettings.Disposition">
            <summary>The action that will be executed on a message after it has been fetched via POP.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.PopSettings.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Profile">
            <summary>Profile for a Gmail user.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Profile.EmailAddress">
            <summary>The user's email address.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Profile.HistoryId">
            <summary>The ID of the mailbox's current history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Profile.MessagesTotal">
            <summary>The total number of messages in the mailbox.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Profile.ThreadsTotal">
            <summary>The total number of threads in the mailbox.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Profile.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.SendAs">
            <summary>
            Settings associated with a send-as alias, which can be either the primary login address associated with the
            account or a custom "from" address. Send-as aliases correspond to the "Send Mail As" feature in the web
            interface.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.DisplayName">
            <summary>
            A name that appears in the "From:" header for mail sent using this alias. For custom "from" addresses, when
            this is empty, Gmail will populate the "From:" header with the name that is used for the primary address
            associated with the account. If the admin has disabled the ability for users to update their name format,
            requests to update this field for the primary login will silently fail.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.IsDefault">
            <summary>
            Whether this address is selected as the default "From:" address in situations such as composing a new
            message or sending a vacation auto-reply. Every Gmail account has exactly one default send-as address, so
            the only legal value that clients may write to this field is `true`. Changing this from `false` to `true`
            for an address will result in this field becoming `false` for the other previous default address.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.IsPrimary">
            <summary>
            Whether this address is the primary address used to login to the account. Every Gmail account has exactly
            one primary address, and it cannot be deleted from the collection of send-as aliases. This field is
            read-only.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.ReplyToAddress">
            <summary>
            An optional email address that is included in a "Reply-To:" header for mail sent using this alias. If this
            is empty, Gmail will not generate a "Reply-To:" header.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.SendAsEmail">
            <summary>
            The email address that appears in the "From:" header for mail sent using this alias. This is read-only for
            all operations except create.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.Signature">
            <summary>
            An optional HTML signature that is included in messages composed with this alias in the Gmail web UI. This
            signature is added to new emails only.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.SmtpMsa">
            <summary>
            An optional SMTP service that will be used as an outbound relay for mail sent using this alias. If this is
            empty, outbound mail will be sent directly from Gmail's servers to the destination SMTP service. This
            setting only applies to custom "from" aliases.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.TreatAsAlias">
            <summary>
            Whether Gmail should treat this address as an alias for the user's primary email address. This setting only
            applies to custom "from" aliases.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.VerificationStatus">
            <summary>
            Indicates whether this address has been verified for use as a send-as alias. Read-only. This setting only
            applies to custom "from" aliases.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SendAs.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.SmimeInfo">
            <summary>An S/MIME email config.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.EncryptedKeyPassword">
            <summary>Encrypted key password, when key is encrypted.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.Expiration">
            <summary>When the certificate expires (in milliseconds since epoch).</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.Id">
            <summary>The immutable ID for the SmimeInfo.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.IsDefault">
            <summary>Whether this SmimeInfo is the default one for this user's send-as address.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.IssuerCn">
            <summary>The S/MIME certificate issuer's common name.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.Pem">
            <summary>
            PEM formatted X509 concatenated certificate string (standard base64 encoding). Format used for returning
            key, which includes public key as well as certificate chain (not private key).
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.Pkcs12">
            <summary>
            PKCS#12 format containing a single private/public key pair and certificate chain. This format is only
            accepted from client for creating a new SmimeInfo and is never returned, because the private key is not
            intended to be exported. PKCS#12 may be encrypted, in which case encryptedKeyPassword should be set
            appropriately.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmimeInfo.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.SmtpMsa">
            <summary>Configuration for communication with an SMTP service.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.Host">
            <summary>The hostname of the SMTP service. Required.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.Password">
            <summary>
            The password that will be used for authentication with the SMTP service. This is a write-only field that can
            be specified in requests to create or update SendAs settings; it is never populated in responses.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.Port">
            <summary>The port of the SMTP service. Required.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.SecurityMode">
            <summary>The protocol that will be used to secure communication with the SMTP service. Required.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.Username">
            <summary>
            The username that will be used for authentication with the SMTP service. This is a write-only field that can
            be specified in requests to create or update SendAs settings; it is never populated in responses.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.SmtpMsa.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.Thread">
            <summary>A collection of messages representing a conversation.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Thread.HistoryId">
            <summary>The ID of the last history record that modified this thread.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Thread.Id">
            <summary>The unique ID of the thread.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Thread.Messages">
            <summary>The list of messages in the thread.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Thread.Snippet">
            <summary>A short part of the message text.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.Thread.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.VacationSettings">
            <summary>
            Vacation auto-reply settings for an account. These settings correspond to the "Vacation responder" feature in
            the web interface.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.EnableAutoReply">
            <summary>Flag that controls whether Gmail automatically replies to messages.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.EndTime">
            <summary>
            An optional end time for sending auto-replies (epoch ms). When this is specified, Gmail will automatically
            reply only to messages that it receives before the end time. If both `startTime` and `endTime` are
            specified, `startTime` must precede `endTime`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.ResponseBodyHtml">
            <summary>
            Response body in HTML format. Gmail will sanitize the HTML before storing it. If both
            `response_body_plain_text` and `response_body_html` are specified, `response_body_html` will be used.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.ResponseBodyPlainText">
            <summary>
            Response body in plain text format. If both `response_body_plain_text` and `response_body_html` are
            specified, `response_body_html` will be used.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.ResponseSubject">
            <summary>
            Optional text to prepend to the subject line in vacation responses. In order to enable auto-replies, either
            the response subject or the response body must be nonempty.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.RestrictToContacts">
            <summary>
            Flag that determines whether responses are sent to recipients who are not in the user's list of contacts.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.RestrictToDomain">
            <summary>
            Flag that determines whether responses are sent to recipients who are outside of the user's domain. This
            feature is only available for Google Workspace users.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.StartTime">
            <summary>
            An optional start time for sending auto-replies (epoch ms). When this is specified, Gmail will automatically
            reply only to messages that it receives after the start time. If both `startTime` and `endTime` are
            specified, `startTime` must precede `endTime`.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.VacationSettings.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.WatchRequest">
            <summary>Set up or update a new push notification watch on this user's mailbox.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchRequest.LabelFilterAction">
            <summary>Filtering behavior of labelIds list specified.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchRequest.LabelIds">
            <summary>
            List of label_ids to restrict notifications about. By default, if unspecified, all changes are pushed out.
            If specified then dictates which labels are required for a push notification to be generated.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchRequest.TopicName">
            <summary>
            A fully qualified Google Cloud Pub/Sub API topic name to publish the events to. This topic name **must**
            already exist in Cloud Pub/Sub and you **must** have already granted gmail "publish" permission on it. For
            example, "projects/my-project-identifier/topics/my-topic-name" (using the Cloud Pub/Sub "v1" topic naming
            format). Note that the "my-project-identifier" portion must exactly match your Google developer project id
            (the one executing this watch request).
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchRequest.ETag">
            <summary>The ETag of the item.</summary>
        </member>
        <member name="T:Google.Apis.Gmail.v1.Data.WatchResponse">
            <summary>Push notification watch response.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchResponse.Expiration">
            <summary>
            When Gmail will stop sending notifications for mailbox updates (epoch millis). Call `watch` again before
            this time to renew the watch.
            </summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchResponse.HistoryId">
            <summary>The ID of the mailbox's current history record.</summary>
        </member>
        <member name="P:Google.Apis.Gmail.v1.Data.WatchResponse.ETag">
            <summary>The ETag of the item.</summary>
        </member>
    </members>
</doc>
